> For the complete documentation index, see [llms.txt](https://ms-kb.msd.unimelb.edu.au/msdmaker/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://ms-kb.msd.unimelb.edu.au/msdmaker/msd-model-making-space/spray-booth/materials.md).

# Materials

You may use any products featured on the approved material list. If you would like to use a material that is not featured on the list, you must source a Material Safety Data Sheet for presentation to Makerspace staff. 

{% embed url="<https://msd.unimelb.edu.au/__data/assets/pdf_file/0004/3076681/FABLAB-MATERIAL-PRICELIST.pdf>" %}

#### Cannot find the right MSDS or have a new material?

The material may not be safe to use, or we haven’t assessed it yet. We recommend using a known material as a substitute. If you must use an unknown material, please:

1. Acquire the correct Safety Data Sheet from the manufacturer.
2. Email the SDS to <fabworks@unimelb.edu.au> and request a review.
3. Wait for review and response, this may take several days.
4. If approved, it is safe to use in the Workshop.