> For the complete documentation index, see [llms.txt](https://ms-kb.msd.unimelb.edu.au/next-lab/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://ms-kb.msd.unimelb.edu.au/next-lab/3d-printing/3dp-introduction-1.md).

# Get Started

Learn and skill up in using 3D Printing workflows

<figure><img src="https://1820679795-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LXautSvCbUco5Lv7YrH%2Fuploads%2FIyI6JSfNfCcfYh5zY8UK%2F3dpfbambu-banner.jpg?alt=media&amp;token=31602687-26da-43ec-bc75-30a56225a1b9" alt=""><figcaption></figcaption></figure>

To use FDM 3D Printing you are required to complete the necessary training or inductions through our Training LMS.

{% embed url="<https://ms-training.msd.unimelb.edu.au/catalogue?tab=all&category=4>" %}
Maker Spaces Training LMS
{% endembed %}

All 3D Printing begins with an understanding of 3D printing concepts:

{% content-ref url="/pages/-M6bseKZYmvtVvxCjaPt" %}
[Design Approaches](/next-lab/3d-printing/design-approaches.md)
{% endcontent-ref %}